- BLACK LION CLOCK MINI CLOCK OUTPUT TO OPTICAL SPDIF GENERATOR
- BLACK LION CLOCK MINI CLOCK OUTPUT TO OPTICAL SPDIF DRIVERS
- BLACK LION CLOCK MINI CLOCK OUTPUT TO OPTICAL SPDIF UPGRADE
The BNC devices can be set with the same Mastership Priority in which case the BLU Link Master will be delegated automatically. If multiple devices are set to synchronize from an external word clock, then they must be set with a higher Mastership Priority than the other devices on the BLU link ring. The Mastership Priority must be set to a higher value than all other devices. If any device on a BLU link ring is set to synchronize from an external word clock, then it must be set as the BLU Link Master. If the Mastership Priorities are the same then the BLU Link Master is delegated automatically. The BLU Link Master is delegated according to the BLU Link Mastership Priority settings. Clocking in a BLU Link system Two or more devices connected with BLU Link will synchronise their main board clock from the device delegated as the BLU Link Master.
BLACK LION CLOCK MINI CLOCK OUTPUT TO OPTICAL SPDIF GENERATOR
The AES/SPDIF output of the Digital Output Card can be synchronised from the system clock master, an external word clock generator or from the input signal of the Digital Input Card fitted in the same device.ģ Clocking in a standalone system A single device with no audio network connections to other devices will synchronise its main board and I/O cards from its internal clock generator unless it is set to synchronise from an external word clock and a valid word clock signal is present. This word clock will appear at the frequency at which the device is running. The Wordclock Out/Buddylink Out BNC socket on supported devices provides a word clock signal for other digital devices. It is possible to synchronise the Dante clock master from an external 48kHz or 96kHz word clock source using supported devices. It is possible to synchronise the BLU Link clock master from an external 48k, kHz, 96kHz or kHz word clock source using supported devices. Clock information is not distributed via the Control network nor by any other means. In a multiple device system, the master clock is distributed to the slave units through the digital audio network via CobraNet, BLU Link or AVB. In a standalone system, either the internal clock generator or an external word clock signal (on supported devices) will synchronise the audio systems on the main board and I/O cards. Pull down kHz or kHz are also available on supported devices. The clock master in a standalone device or a multiple device system can run at either 48kHz or 96kHz. One device assumes the role of clock master and all other devices become clock slaves. Power connector: 2.1mm barrel connector with 5.5mm outer diameter (center pin positive)ĭimensions: 6.5”L x 6”W x 1.1 audio HiQnet architect Digital Clocking in Soundweb London APPLICATION GUIDEĢ Digital Clocking in Soundweb London General information The digital clocking schema for Soundweb London devices works in a similar way to most other digital audio devices. cable length = 1,000ft of high quality, 75Ω coaxial cable) Outputs: 6 BNC, 1 XLR AES, 1 RCA S/PDIF, 1 Optical S/PDIF (recommended max.
BLACK LION CLOCK MINI CLOCK OUTPUT TO OPTICAL SPDIF DRIVERS
6 BNC outputs with dedicated output drivers for maximum isolation.Ultra-low jitter, harmonically-enhanced word clock signal generation.The feature set has expanded to include an LED frequency display, six BNC outputs capable of up to 384kHz, AES and RCA S/PDIF outputs capable of up to 192kHz, an optical S/PDIF output capable of up to 96kHz, and removable rack ears. All of this results in a more robust, lower-jitter clock signal than the Micro Clock MKII, with even more desirable harmonics in the clock’s spectral band that impart an undeniable musical quality to the conversion process. Core technological improvements include lower-jitter crystal oscillators, higher-quality galvanic transformer isolation in the signal path, dedicated output drivers with better isolation, higher-precision signal division, and much heavier noise filtration throughout the circuit. The Micro Clock MKIII is a significant redesign of its predecessor, the Micro Clock MKII. Get ready to hear what you’ve been missing!
BLACK LION CLOCK MINI CLOCK OUTPUT TO OPTICAL SPDIF UPGRADE
It may be the most significant single upgrade you can make to your digital audio setup. It not only can sync all of your digital audio gear together, but can significantly improve the sound quality as well. The Micro Clock MKIII is the culmination of almost 10 years of research involving jitter-reducing, harmonic-enhancing design techniques not found in any other master word clocks on the market.
0 kommentar(er)
